Pet Resolve Dog Training Collar Overview
Are you looking to learn more about the popular Pet Resolve training collar for dogs? In this article, we’ll give a detailed Pet Resolve dog training collar review.
The Pet Resolve dog training collar packs a lot of power and utility for its price, or so they say. We’ll see whether those features truly deliver for a product that is widely considered the best bang for its buck among shock collars.
Upon opening the box, we have the following items:
- 1 Remote Control
- 1 Receiver
- 1 Bio-thane Collar
- 1 USB Charger
- 1 Split Charging Cable
- 1 Shock Tester
- 1 Pet Clicker
- 3 Pairs of prongs with varied lengths
- 1 Pair of Plastic Non-Conductive Prongs
- 1 Flat Wrench
- 1 Lanyard
Manual and Safety Guide
As expected, the box has everything you need to set up the training collar. It also comes with a small flat wrench for those who have trouble tightening the prongs. The shortest prongs are already on the receiver, so if you have a short-haired dog, it’s good to go. The device should come charged, but getting a collar without a charge is also normal. If that’s your case, you can use the included charger and charge the device for an hour or two before beginning with setup.
The tester is pretty intuitive. Make sure both the remote and collar are on, then line the receiver’s prongs along the two slots and press the remote. A small LED will light up when the shock is working, and the flash brightens when you increase the shock level.
The lanyard is also a nice touch, allowing you to wear the remote around your neck or wrap it around your wrist.
The Pet Resolve collar comes with the standard three training functions: shock/vibration, non-ultrasonic tone, and stimulation.
Shock and Vibration
The shock function comes in either a nick or a continuous series of nicks (fast bursts of shock or vibration). The strength of the static shock is entirely subjective, as every dog has differing tolerance levels. Still, the receiver’s vibration levels are strong enough to get a dog’s attention.
The non-ultrasonic tone may sound weak to you, but it’s not for you to hear anyway. To us, it is soft enough that it won’t damage your dog’s hearing but will still get its attention. You can easily hear the tone in a quiet environment, so if you lose the receiver, it may be possible to locate it using the tone.
The Pet Resolve remote offers ten adjustable levels of stimulation, too. You can adjust them using the plus and minus buttons on the remote, and it affects both the vibration and shock modes. The advantage of having just ten adjustable levels is it’s easy and quick to increase and decrease the function.
Other Special Functions
The Pet Resolve dog training collar packs serious functionality on top of its three standard features. Check out these other helpful functions.
The collar’s remote range is impressive. Having a 3/4 mile range in open spaces is quite far. A high range is essential for shock collars as obstacles like trees and walls can dampen the signal, shortening the range. A brick wall can drop the signal by 80%. But, if the max range is 1400 yards (3/4 miles), you could still reach your dog past a football field.
Switching to the Anti-Bark mode is easy. Hold the power button and release it when you see the red LED flash on the receiver. If you hear the beep, you’ve held it for too long. You can still use the remote to change the receiver’s shock level in this mode, but the other functions won’t work.
In this mode, the collar listens for your dog’s bark. If your dog does bark, the receiver delivers a warning beep, the same as the beeping tone it does in training mode. If your dog keeps barking after two seconds, the collar will trigger a momentary shock.
If your dog still keeps barking after two seconds, the shock will be triggered again. This detection loop continues until it triggers eight shocks, then stops for two minutes before resetting. If your dog stops barking before that, for at least five seconds, the collar will reset.
The anti-bark feature is pretty forgiving, allowing your dog to bark for three to four seconds before the first shock. But this feature won’t keep your dog from barking altogether. Instead, it just prevents the barking from becoming excessive.
Eventually, your dog should learn to stop barking after two to three seconds, or at least when it hears the warning beep. The mic is not very sensitive either, so your neighbor’s barking dog should not trigger it unless they are quite close or extraordinarily loud.
Pairing with Multiple Dogs
The Pet Resolve dog training collar remote can be paired with three dogs at the same time and switched between them at the press of a button.
What You Get with Your Pet Resolve Training Collar
Upon opening the box for the Pet Resolve dog training collar, you’ll find a variety of pieces and parts, all of which can help you train your furry friend. Let’s check out some of the standout components.
The remote has a soft and impact-resistant rubber coating, which makes holding It much easier, especially with wet hands. Anyone with an average-sized hand can easily reach the well-labeled buttons.
The intensity level buttons on the remote are triangular and aligned with the beep and vibration. Just below the vibration button is the shock button. After some practice, operating the remote without looking at it will be quite easy, making it useful for hunting and hiding the remote behind you when you’re training your dog.
The remote is also water-resistant, enough to resist rain and even direct water from the faucet. There’s also a slot close to the antenna where you can place the lanyard. The remote’s simple LCD screen shows you the current shock level and which collar is being affected. It also has a backlight so you can see in bright conditions.
Pairing Additional Collars
If you purchase an additional collar or two, you can pair all three to one remote. The buttons on the bottom of the remote not only switch which collar the remote will affect but also trigger the LEDs with different colors, allowing you to identify which dog is where.
Overall, the remote is sturdy, and the button layout has an intuitive design. If you’re focusing on hunting and basic training, having a dependable remote like Pet Resolve’s will satisfy your needs.
Pet Resolve’s flat adjustable collar can easily fit large or small dogs. But you may have trouble fitting this on dogs lighter than 15 pounds. This isn’t so much because of the collar, but the receiver, which could be heavy and awkward to position on smaller dogs.
The flat bio thane collar is also tough enough to function as a collar on its own. But we don’t recommend using it as a regular collar with the receiver on or when you’re training your dog, as it will ruin the contact points needed for consistent shock levels.
The collar is also waterproof and dirt-proof, making it easy to clean, even with the receiver on. The collar strap’s holes are pretty close to each other, allowing for precise adjustment when tightening or loosening it.
The receiver has an LED inside its case instead of being exposed. Combined with the thick smoked plastic shell, the LED causes the entire front of the receiver to light up. This is super helpful, as some LEDs are positioned closer to the neck, so long-haired dogs tend to block the light.
The LED is not as bright as others, but the strobing function makes it easy to spot from afar. If you pair the collar to a certain number, it will flash a different color. Available options are white, red, and green. You can assign a different color to each dog, making it easier to spot which dog is which in the dark.
The receiver is waterproof. Based on the rating, it can withstand being under 25 feet of water for 30 minutes before water seeps in.
Both the remote and receiver have a long-lasting battery life despite not having a standby mode. While this leads to more power consumption, it’s handy when you need the device to work right away.
If battery levels are low, both the remote and receiver have light indicators that will signal this. Fully charging the device only takes about 2 hours, making it handy for any last-minute needs.
Due to the chemical reactions Lithium-Ion batteries require, charging your devices in freezing weather may take longer and hamper performance. Pet Resolve recommends always charging the collar in temperatures of 50F (10C) and up to prevent battery damage.
Starting at full charge, you can expect to get about eight to ten days of moderate use (at about eight hours per day) before needing to recharge. Considering it only takes two to three hours to fully charge your device, this is an excellent ratio. The Y-Charging cord that comes with your Pet Resolve collar also means you can charge both devices at once. If you lose the charger, any cellphone charger will also work.
The kit also comes with four pairs of prongs, a very short pair of plastic nubs for no-shock usage, and three pairs of metal prongs of varying lengths.
The longest pair of prongs is great for dogs that have long hair or double coats, as you don’t need to place the collar too tightly. You just need the contact points to touch the dog’s skin. It’s worth noting that metal prongs that have good contact with a dog’s skin eliminate the chances of pain when using static shock and amplify the effect of the vibration.
The Pet Resolve dog training collar kit also comes with a plastic pet clicker. This bonus clicker is extremely useful when you need to consistently signal your dog during training. The most common way to use it is to signal that your dog did the correct action.
The charger included with the Pet Resolve collar is your standard USB charger. It has a small light that tells you if the charger is working and lets you find it in the dark. The split charging cable is standard and flexible. It appears to be as tough as your average charging cable.
Final Thoughts: Pet Resolve Dog Training Collar Review
Here are our final thoughts on the most important components and functions of the Pet Resolve dog training color.
Hands-on, the remote training collar works like any other. It’s a little hard to tighten, especially with a fidgety dog, but once you lock down on the tightness, marking the hole on the collar strap helps. The flat collar is also very durable, as evidenced by how difficult it can be to trim if you don’t have sharp enough scissors.
The remote buttons are easy to press, and there’s a bit of feedback when pressing. It takes some time to get used to the button layout. When training, you’d typically have your thumb resting on the button anyway, so your hand will eventually position itself automatically to the shock trigger.
The ergonomic design and shape of the remote allow you to grip it securely. Eventually, perhaps in a year or two of constant use, the rubber on the remote may lose some of its grips.
There’s still no dependable way to measure the static shock level, but it’s always wise to use the lowest level first. If you have a sensitive dog, it’s better to stick to the lower levels. If your dog flinches at the shock, we suggest using the vibration instead. Since it only has ten levels, it’s very quick and easy to switch levels when needed.
Pairing Extra Collars
After getting extra collars, pairing them is easy enough, and the remote also remembers the levels of each paired collar. Having a ¾ mile range means you have a large radius of operation, so even if your dogs wander at least 800 yards away from you in different directions, you can still signal them or at least activate the LED strobe to locate them easily.
In terms of adjusting bad behavior, it depends on how the pet owner or professional trainer does it. As long as you know the method, this collar has everything you need to promote desirable behavior. Using the clicker and a treat is enough to modify a dog’s behavior.
Frequently Asked Questions
Vibration and shock collars are much faster than verbal training and will mark certain behaviors as ‘undesirable’ more quickly.
If you’re apprehensive about using a shock collar, you can opt for clicker training, citronella collars, whistlers, or scents for training your dog.
The answer to this question is entirely dependent on your dog. But, most dogs are ready for shock training by the time they reach six months of age.
Pet Resolve Dog Training Collar Review: Is it Worth the Price?
The Pet Resolve dog training collar acts has all the features you need for training your canine companion. It’s as durable as they come and could last you a long while. It also remains useful even outside of training.
It’s a high-quality dog training collar for any situation, and we think it’s worth buying!
You will also like:
- The Best Shock Collar for Dogs Barking!
- Best Shock Collar For A Mastiff!
- Best E-Collars for Aggressive Dogs!
Want to learn more? Watch this video! “5 Tips: E-Collar Dog Training for Beginners”
Garrett loves animals and is a huge advocate for all Doodle dog breeds. He owns his own Goldendoodle named Kona. In addition, he volunteers at the Humane Society of Silicon Valley, where he fosters dogs and helps animals. Garrett enjoys writing about Doodles and believes that dogs can teach humans more about how to live than humans can teach a dog.
Why Trust We Love Doodles?
At We Love Doodles, we’re a team of writers, veterinarians, and puppy trainers that love dogs. Our team of qualified experts researches and provides reliable information on a wide range of dog topics. Our reviews are based on customer feedback, hands-on testing, and in-depth analysis. We are fully transparent and honest to our community of dog owners and future owners.